انطباق ایمنی در برابر آتش و تأیید بدون هالوژن برای ترکیبات LSZH برای کابل های ارتباطی

در بازار جهانی زیرساخت و شبکه های ارتباطی، مشخصات ** ترکیبات LSZH برای کابل های ارتباطی ** یک الزام غیر قابل مذاکره است که توسط مقررات ایمنی آتش نشانی سختگیرانه هدایت می شود. استفاده از مواد هالوژن کم دود صفر از انتشار دود متراکم و گازهای خورنده و سمی در حین احتراق جلوگیری می کند و از زندگی انسان و تجهیزات الکترونیکی حساس محافظت می کند. برای تولیدکنندگان کابل، تأیید انطباق مستلزم روش‌های دقیق **آزمایش ترکیب بدون هالوژن** و رعایت الزامات خاص **LSZH با چگالی کم دود** است. Hangzhou Meilin New Material Technology Co.، با بیش از 30 سال تجربه و 31 خط تولید پیشرفته در سه کارخانه، متخصص در ساخت ترکیبات LSZH با کیفیت بالا، تضمین انطباق و عملکرد برتر برای مشتریان داخلی و بین المللی است.

ML- TH9002B2 ترموپلاستیک LSZH مواد غلاف مقاوم در برابر شعله درجه B2ca

تایید و سمیت بدون هالوژن

اصل اصلی LSZH حذف محصولات احتراق بسیار خورنده است.

در حال اجرا آزمایش ترکیبات بدون هالوژن رویه ها

To confirm that a product qualifies as halogen-free, rigorous **Halogen-free compound testing** procedures must be conducted, primarily the IEC 60754 series. This involves burning the material under controlled conditions and measuring the acidity (pH) and conductivity of the resulting combustion gases. The standard mandates that the pH value must be above $4.3$ (indicating low acidity) and the conductivity must be below $10 \mu\text{S}/\text{mm (indicating minimal ionized corrosive content). This ensures the material does not pose a threat to people or cause corrosion damage to nearby infrastructure.

Comparing Halogenated vs. Halogen-Free Compounds

The chemical difference between traditional and modern compounds is vital. Standard materials like PVC rely on chlorine (a halogen) to achieve fire retardancy, but combustion releases highly toxic and corrosive Hydrogen Chloride (HCl) gas. **LSZH Compounds For Communication Cables**, conversely, achieve flame retardancy through large loadings of metal hydroxides (e.g., magnesium hydroxide). When heated, these hydroxides decompose endothermically, releasing water vapor to cool the flame and forming a protective char layer, effectively eliminating acid gas release.

Comparison: Compound Type vs. Acid Gas Emission and Environmental Impact:

Flammability and Smoke Density Control

Beyond acid gas, controlling the spread of fire and maintaining visibility are crucial safety factors.

Interpreting Flammability testing standards for cable jackets

Verification of flame spread resistance relies on strict **Flammability testing standards** such as IEC 60332. The single cable vertical flame test (IEC 60332-1-2) confirms that the jacket material is self-extinguishing and will not propagate the flame. For large installations, more demanding bundle tests (IEC 60332-3) are required. B2B buyers should also review the Limiting Oxygen Index (LOI) of the compound; a higher LOI value (typically $> 30\%$) indicates a stronger resistance to ignition and combustion.

Meeting stringent LSZH low smoke density requirements

The primary threat in enclosed fires is smoke inhalation and loss of visibility, which hinders evacuation. The IEC 61034 standard dictates how **LSZH Compounds For Communication Cables** must perform regarding smoke emission. The test measures the percentage of light lost over a specified path length when the cable is combusted. Achieving **LSZH low smoke density** requirements means the material must maintain a high percentage of light transmittance (typically $> 60\%$) throughout the test, a key performance metric for **LSZH materials for data cable** jacketing used in tunnels and subways.

Manufacturing Considerations and Performance

Compound processability is tied directly to manufacturing efficiency and final product quality.

Processing characteristics of LSZH for high-speed extrusion

The **Processing characteristics of LSZH** are inherently complex due to the heavy loading of non-polymeric mineral fillers required for fire retardancy. This high filler content affects the compound's viscosity and melt strength. Manufacturers must select compounds specifically optimized for high-speed extrusion lines. Poor **Processing characteristics of LSZH** can lead to extruder surging, material degradation, and surface roughness on the final cable jacket, requiring specialized extrusion equipment and precise temperature control.

Applying LSZH materials for data cable jacketing

When using **LSZH materials for data cable** jacketing (e.g., Cat 6, Cat 7), the compound must meet two sets of demanding criteria: fire safety *and* electrical performance. **LSZH Compounds For Communication Cables** used for high-frequency data transmission must have a stable, low relative permittivity and low dissipation factor to minimize signal attenuation and maintain the necessary bandwidth capacity. Compromising on the electrical properties of the **LSZH materials for data cable** jacketing for the sake of fire performance is unacceptable in modern networks.

Conclusion

Sourcing **LSZH Compounds For Communication Cables** is a critical engineering decision that balances fire safety compliance with manufacturing efficiency. Success depends on selecting materials that have passed stringent **Halogen-free compound testing** procedures, meet demanding **LSZH low smoke density** requirements, and exhibit excellent **Processing characteristics of LSZH**. Hangzhou Meilin New Material Technology Co., Ltd. leverages its technological expertise, advanced production lines, and commitment to R&D to provide high-quality **LSZH materials for data cable** jacketing and other specialized compounds that consistently meet global **Flammability testing standards** and performance expectations.

Frequently Asked Questions (FAQ)

• What is the key chemical mechanism that enables **LSZH Compounds For Communication Cables** to reduce smoke? **LSZH Compounds For Communication Cables** often contain high loadings of inorganic metal hydroxides (like Al(OH)}_3$ or Mg(OH)}_2$). When exposed to heat, these compounds release water vapor and form a dense char layer, which acts as a barrier to suppress smoke formation.
• محدوده قابل قبول معمولی برای pH در روش های **آزمایش ترکیبات بدون هالوژن ** (IEC 60754-2) چقدر است؟ استاندارد IEC 60754-2 ایجاب می کند که pH عصاره آبی گازهای حاصل از احتراق باید بیشتر از 4.3 دلار باشد تا سازگار و غیرخورنده در نظر گرفته شود.
• Why is the **ویژگی های پردازش LSZH** often more difficult than PVC? **ترکیبات LSZH برای کابل های ارتباطی** contain significantly higher volumes of inorganic solid fillers (up to $60\%$) required for fire suppression. This high filler content increases the compound's viscosity, making it more difficult to process smoothly and rapidly on high-speed extrusion lines compared to unfilled or lightly filled PVC.
• How does the choice of **مواد LSZH برای کابل داده** ژاکت کردن affect Cat 6A performance? بالا-speed data cables require jackets with a low, stable Dielectric Constant ($K$) to minimize signal loss (attenuation). If the **LSZH materials for data cable** jacketing formulation has a high $K$ value or inconsistent mixing, it can degrade the cable's impedance and fail to meet Cat 6A transmission الزامات.
• Is passing the IEC 60332-1 test sufficient for a **LSZH چگالی دود کم** claim? شماره تصویب IEC 60332-1 (گسترش شعله عمودی) فقط تاخیر شعله را تایید می کند. ادعای **LSZH تراکم دود کم** باید به طور جداگانه با استفاده از استاندارد IEC 61034 تأیید شود که میزان عبور نور را در هنگام احتراق اندازه گیری می کند.